QA@IT
«質問へ戻る

-4
本文
-現在、xamppのmysql tomcat apachを使いサーブレットの勉強をしています。
-この中で、text文章をmysqlで展開すると文字化けします。(my.ini)の設定はすべてUTF-8にしてあります
-my.iniは
-# Example MySQL config file for small systems.
-#
-# This is for a system with little memory (<= 64M) where MySQL is only used
-# from time to time and it's important that the mysqld daemon
-# doesn't use much resources.
-#
-# You can copy this file to
-# /xampp/mysql/bin/my.cnf to set global options,
-# mysql-data-dir/my.cnf to set server-specific options (in this
-# installation this directory is /xampp/mysql/data) or
-# ~/.my.cnf to set user-specific options.
-#
-# In this file, you can use all long options that a program supports.
-# If you want to know which options a program supports, run the program
-# with the "--help" option.
-
-# The following options will be passed to all MySQL clients
-[client] 
-# password       = your_password 
-port            = 3306 
-socket          = "/xampp/mysql/mysql.sock"
-
-
-# Here follows entries for some specific programs 
-
-# The MySQL server
-
-default-character-set=utf8
-
-
-[mysqld]
-port= 3306
-socket = "/xampp/mysql/mysql.sock"
-basedir = "/xampp/mysql" 
-tmpdir = "/xampp/tmp" 
-datadir = "/xampp/mysql/data"
-pid_file = "mysql.pid"
-# enable-named-pipe
-key_buffer = 16M
-max_allowed_packet = 1M
-sort_buffer_size = 512K
-net_buffer_length = 8K
-read_buffer_size = 256K
-read_rnd_buffer_size = 512K
-myisam_sort_buffer_size = 8M
-log_error = "mysql_error.log"
-
-character-set-server=utf8
-skip-character-set-client-handshake
-
-
-# Change here for bind listening
-# bind-address="127.0.0.1" 
-# bind-address = ::1          # for ipv6
-
-# Where do all the plugins live
-plugin_dir = "/xampp/mysql/lib/plugin/" 
-
-# Don't listen on a TCP/IP port at all. This can be a security enhancement,
-# if all processes that need to connect to mysqld run on the same host.
-# All interaction with mysqld must be made via Unix sockets or named pipes.
-# Note that using this option without enabling named pipes on Windows
-# (via the "enable-named-pipe" option) will render mysqld useless!
-# 
-# commented in by lampp security
-#skip-networking
-skip-federated
-
-# Replication Master Server (default)
-# binary logging is required for replication
-# log-bin deactivated by default since XAMPP 1.4.11
-#log-bin=mysql-bin
-
-# required unique id between 1 and 2^32 - 1
-# defaults to 1 if master-host is not set
-# but will not function as a master if omitted
-server-id	= 1
-
-# Replication Slave (comment out master section to use this)
-#
-# To configure this host as a replication slave, you can choose between
-# two methods :
-#
-# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
-#    the syntax is:
-#
-#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
-#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
-#
-#    where you replace <host>, <user>, <password> by quoted strings and
-#    <port> by the master's port number (3306 by default).
-#
-#    Example:
-#
-#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
-#    MASTER_USER='joe', MASTER_PASSWORD='secret';
-#
-# OR
-#
-# 2) Set the variables below. However, in case you choose this method, then
-#    start replication for the first time (even unsuccessfully, for example
-#    if you mistyped the password in master-password and the slave fails to
-#    connect), the slave will create a master.info file, and any later
-#    change in this file to the variables' values below will be ignored and
-#    overridden by the content of the master.info file, unless you shutdown
-#    the slave server, delete master.info and restart the slaver server.
-#    For that reason, you may want to leave the lines below untouched
-#    (commented) and instead use CHANGE MASTER TO (see above)
-#
-# required unique id between 2 and 2^32 - 1
-# (and different from the master)
-# defaults to 2 if master-host is set
-# but will not function as a slave if omitted
-#server-id       = 2
-#
-# The replication master for this slave - required
-#master-host     =   <hostname>
-#
-# The username the slave will use for authentication when connecting
-# to the master - required
-#master-user     =   <username>
-#
-# The password the slave will authenticate with when connecting to
-# the master - required
-#master-password =   <password>
-#
-# The port the master is listening on.
-# optional - defaults to 3306
-#master-port     =  <port>
-#
-# binary logging - not required for slaves, but recommended
-#log-bin=mysql-bin
-
-
-# Point the following paths to different dedicated disks
-#tmpdir = "/xampp/tmp"
-#log-update = /path-to-dedicated-directory/hostname
-
-# Uncomment the following if you are using BDB tables
-#bdb_cache_size = 4M
-#bdb_max_lock = 10000
-
-# Comment the following if you are using InnoDB tables
-#skip-innodb
-innodb_data_home_dir = "/xampp/mysql/data"
-innodb_data_file_path = ibdata1:10M:autoextend
-innodb_log_group_home_dir = "/xampp/mysql/data"
-#innodb_log_arch_dir = "/xampp/mysql/data"
-## You can set .._buffer_pool_size up to 50 - 80 %
-## of RAM but beware of setting memory usage too high
-innodb_buffer_pool_size = 16M
-innodb_additional_mem_pool_size = 2M
-## Set .._log_file_size to 25 % of buffer pool size
-innodb_log_file_size = 5M
-innodb_log_buffer_size = 8M
-innodb_flush_log_at_trx_commit = 1
-innodb_lock_wait_timeout = 50
-
-## UTF 8 Settings
-#init-connect=\'SET NAMES utf8\'
-#collation_server=utf8_unicode_ci
-#character_set_server=utf8
-#skip-character-set-client-handshake
-#character_sets-dir="/xampp/mysql/share/charsets"
-
-
-[mysqldump]
-quick
-max_allowed_packet = 16M
-default-character-set=utf8
-
-
-[mysql]
-no-auto-rehash
-# Remove the next comment character if you are not familiar with SQL
-#safe-updates
-
-default-character-set=utf8
-
-[isamchk]
-key_buffer = 20M
-sort_buffer_size = 20M
-read_buffer = 2M
-write_buffer = 2M
-
-[myisamchk]
-key_buffer = 20M
-sort_buffer_size = 20M
-read_buffer = 2M
-write_buffer = 2M
-
-[mysqlhotcopy]
-interactive-timeout
-
-
-
-になっており
-
-サーブレットのweb.xmlの登録はしており、
-
-肝心のjavaファイルは
-import javax.servlet.*;
-import javax.servlet.http.*;
-import java.io.*;
-import java.sql.DriverManager;
-import java.sql.ResultSet;
-import com.mysql.jdbc.Connection;
-import com.mysql.jdbc.Statement;
-public class SelectAll extends HttpServlet {
-	private ServletContext context;
-	private Connection connection;
-	public void init(ServletConfig config) throws ServletException {
-		super.init(config);
-		context=config.getServletContext();
-		try {
-			Class.forName("org.gjt.mm.mysql.Driver");
-			connection=(Connection) DriverManager.getConnection("jdbc:mysql:///foods?useUnicode=true&characterEncoding=UTF-8","root","");
-		} catch(Exception e)	{
-			context.log("Error at SQL connection");
-		}
-	}
-	public void destroy() {
-		try	{
-			if(connection!=null) {
-				connection.close();
-			}
-		} catch(Exception e) {
-			context.log("Error at SQL connection close");
-		}
-	}
-    public void doGet(HttpServletRequest request, HttpServletResponse response)
-	throws ServletException, IOException {
-		response.setContentType("text/html;charset=UTF-8");
-		PrintWriter out=response.getWriter();
-		out.println("<!doctype html><html lang=ja><head><meta charset=utf-8><title>MySQL select all</title></head><body>");
-		try {
-			String foodname=null;
-			String maker=null;
-			String category=null;
-			int price=0;
-			String html=null;
-			Statement statement=(Statement) connection.createStatement();
-			String sql="SELECT * FROM foodslist";
-			ResultSet rs=(ResultSet) statement.executeQuery(sql);
-			out.println("<table border=\"1\"><tr><th>商品名</th><th>メーカー</th><th>カテゴリー</th><th>価格(円)</th></tr>");
-			while(rs.next()) {
-				foodname=rs.getString("foodname");
-				maker=rs.getString("maker");
-				category=rs.getString("category");
-				price=rs.getInt("price");
-				html="<tr><td>"+foodname+"</td>";
-				html+="<td>"+maker+"</td>";
-				html+="<td>"+category+"</td>";
-				html+="<td>"+price+"</td></tr>";
-				out.println(html);
-			}
-			out.println("</table>");
-			rs.close();
-			statement.close();
-		} catch(Exception e)	{
-			context.log("Error at SQL execute");
-			e.printStackTrace(out);
-		}
-		out.println("</body></html>");
-		out.close();
-    }
-}
-なっていてコンパイルはjavac -encoding utf-8でコンパイルし配置も完璧だと思います
-文字化けの直し方がずっとやっていますが分からなくて仕方ないです。
-ちなみに、xamppではapach mysql tomcatと全て立ち上げlocalhost8080から配置されたフォルダにアクセスをして
-いています。
-でてくるのは文字化けしたものがでてきます。textの入れ方?などが悪いのか何処が悪いのかがわからないので
-分かる方お願いします。
+解決しました。ありがとうございます

xampp mysql についてのしつもん

解決しました。ありがとうございます

解決しました。ありがとうございます

質問を投稿

xampp mysql についてのしつもん

現在、xamppのmysql tomcat apachを使いサーブレットの勉強をしています。
この中で、text文章をmysqlで展開すると文字化けします。(my.ini)の設定はすべてUTF-8にしてあります
my.iniは

Example MySQL config file for small systems.

#

This is for a system with little memory (<= 64M) where MySQL is only used

from time to time and it's important that the mysqld daemon

doesn't use much resources.

#

You can copy this file to

/xampp/mysql/bin/my.cnf to set global options,

mysql-data-dir/my.cnf to set server-specific options (in this

installation this directory is /xampp/mysql/data) or

~/.my.cnf to set user-specific options.

#

In this file, you can use all long options that a program supports.

If you want to know which options a program supports, run the program

with the "--help" option.

The following options will be passed to all MySQL clients

[client]

password = your_password

port = 3306
socket = "/xampp/mysql/mysql.sock"

Here follows entries for some specific programs

The MySQL server

default-character-set=utf8

[mysqld]
port= 3306
socket = "/xampp/mysql/mysql.sock"
basedir = "/xampp/mysql"
tmpdir = "/xampp/tmp"
datadir = "/xampp/mysql/data"
pid_file = "mysql.pid"

enable-named-pipe

key_buffer = 16M
max_allowed_packet = 1M
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M
log_error = "mysql_error.log"

character-set-server=utf8
skip-character-set-client-handshake

Change here for bind listening

bind-address="127.0.0.1"

bind-address = ::1 # for ipv6

Where do all the plugins live

plugin_dir = "/xampp/mysql/lib/plugin/"

Don't listen on a TCP/IP port at all. This can be a security enhancement,

if all processes that need to connect to mysqld run on the same host.

All interaction with mysqld must be made via Unix sockets or named pipes.

Note that using this option without enabling named pipes on Windows

(via the "enable-named-pipe" option) will render mysqld useless!

commented in by lampp security

#skip-networking
skip-federated

Replication Master Server (default)

binary logging is required for replication

log-bin deactivated by default since XAMPP 1.4.11

#log-bin=mysql-bin

required unique id between 1 and 2^32 - 1

defaults to 1 if master-host is not set

but will not function as a master if omitted

server-id = 1

Replication Slave (comment out master section to use this)

#

To configure this host as a replication slave, you can choose between

two methods :

#

1) Use the CHANGE MASTER TO command (fully described in our manual) -

the syntax is:

#

CHANGE MASTER TO MASTER_HOST=, MASTER_PORT=,

MASTER_USER=, MASTER_PASSWORD= ;

#

where you replace , , by quoted strings and

by the master's port number (3306 by default).

#

Example:

#

CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,

MASTER_USER='joe', MASTER_PASSWORD='secret';

#

OR

#

2) Set the variables below. However, in case you choose this method, then

start replication for the first time (even unsuccessfully, for example

if you mistyped the password in master-password and the slave fails to

connect), the slave will create a master.info file, and any later

change in this file to the variables' values below will be ignored and

overridden by the content of the master.info file, unless you shutdown

the slave server, delete master.info and restart the slaver server.

For that reason, you may want to leave the lines below untouched

(commented) and instead use CHANGE MASTER TO (see above)

#

required unique id between 2 and 2^32 - 1

(and different from the master)

defaults to 2 if master-host is set

but will not function as a slave if omitted

#server-id = 2
#

The replication master for this slave - required

#master-host =
#

The username the slave will use for authentication when connecting

to the master - required

#master-user =
#

The password the slave will authenticate with when connecting to

the master - required

#master-password =
#

The port the master is listening on.

optional - defaults to 3306

#master-port =
#

binary logging - not required for slaves, but recommended

#log-bin=mysql-bin

Point the following paths to different dedicated disks

#tmpdir = "/xampp/tmp"
#log-update = /path-to-dedicated-directory/hostname

Uncomment the following if you are using BDB tables

#bdb_cache_size = 4M
#bdb_max_lock = 10000

Comment the following if you are using InnoDB tables

#skip-innodb
innodb_data_home_dir = "/xampp/mysql/data"
innodb_data_file_path = ibdata1:10M:autoextend
innodb_log_group_home_dir = "/xampp/mysql/data"
#innodb_log_arch_dir = "/xampp/mysql/data"

You can set .._buffer_pool_size up to 50 - 80 %

of RAM but beware of setting memory usage too high

innodb_buffer_pool_size = 16M
innodb_additional_mem_pool_size = 2M

Set .._log_file_size to 25 % of buffer pool size

innodb_log_file_size = 5M
innodb_log_buffer_size = 8M
innodb_flush_log_at_trx_commit = 1
innodb_lock_wait_timeout = 50

UTF 8 Settings

#init-connect=\'SET NAMES utf8\'
#collation_server=utf8_unicode_ci
#character_set_server=utf8
#skip-character-set-client-handshake
#character_sets-dir="/xampp/mysql/share/charsets"

[mysqldump]
quick
max_allowed_packet = 16M
default-character-set=utf8

[mysql]
no-auto-rehash

Remove the next comment character if you are not familiar with SQL

#safe-updates

default-character-set=utf8

[isamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[myisamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout

になっており

サーブレットのweb.xmlの登録はしており、

肝心のjavaファイルは
import javax.servlet.;
import javax.servlet.http.
;
import java.io.*;
import java.sql.DriverManager;
import java.sql.ResultSet;
import com.mysql.jdbc.Connection;
import com.mysql.jdbc.Statement;
public class SelectAll extends HttpServlet {
private ServletContext context;
private Connection connection;
public void init(ServletConfig config) throws ServletException {
super.init(config);
context=config.getServletContext();
try {
Class.forName("org.gjt.mm.mysql.Driver");
connection=(Connection) DriverManager.getConnection("jdbc:mysql:///foods?useUnicode=true&characterEncoding=UTF-8","root","");
} catch(Exception e) {
context.log("Error at SQL connection");
}
}
public void destroy() {
try {
if(connection!=null) {
connection.close();
}
} catch(Exception e) {
context.log("Error at SQL connection close");
}
}
public void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
response.setContentType("text/html;charset=UTF-8");
PrintWriter out=response.getWriter();
out.println("<!doctype html>MySQL select all");
try {
String foodname=null;
String maker=null;
String category=null;
int price=0;
String html=null;
Statement statement=(Statement) connection.createStatement();
String sql="SELECT * FROM foodslist";
ResultSet rs=(ResultSet) statement.executeQuery(sql);
out.println("商品名メーカーカテゴリー価格(円)");
while(rs.next()) {
foodname=rs.getString("foodname");
maker=rs.getString("maker");
category=rs.getString("category");
price=rs.getInt("price");
html=""+foodname+"";
html+=""+maker+"";
html+=""+category+"";
html+=""+price+"";
out.println(html);
}
out.println("");
rs.close();
statement.close();
} catch(Exception e) {
context.log("Error at SQL execute");
e.printStackTrace(out);
}
out.println("");
out.close();
}
}
なっていてコンパイルはjavac -encoding utf-8でコンパイルし配置も完璧だと思います
文字化けの直し方がずっとやっていますが分からなくて仕方ないです。
ちなみに、xamppではapach mysql tomcatと全て立ち上げlocalhost8080から配置されたフォルダにアクセスをして
いています。
でてくるのは文字化けしたものがでてきます。textの入れ方?などが悪いのか何処が悪いのかがわからないので
分かる方お願いします。

現在、xamppのmysql tomcat apachを使いサーブレットの勉強をしています。
この中で、text文章をmysqlで展開すると文字化けします。(my.ini)の設定はすべてUTF-8にしてあります
my.iniは
# Example MySQL config file for small systems.
#
# This is for a system with little memory (<= 64M) where MySQL is only used
# from time to time and it's important that the mysqld daemon
# doesn't use much resources.
#
# You can copy this file to
# /xampp/mysql/bin/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options (in this
# installation this directory is /xampp/mysql/data) or
# ~/.my.cnf to set user-specific options.
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.

# The following options will be passed to all MySQL clients
[client] 
# password       = your_password 
port            = 3306 
socket          = "/xampp/mysql/mysql.sock"


# Here follows entries for some specific programs 

# The MySQL server

default-character-set=utf8


[mysqld]
port= 3306
socket = "/xampp/mysql/mysql.sock"
basedir = "/xampp/mysql" 
tmpdir = "/xampp/tmp" 
datadir = "/xampp/mysql/data"
pid_file = "mysql.pid"
# enable-named-pipe
key_buffer = 16M
max_allowed_packet = 1M
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M
log_error = "mysql_error.log"

character-set-server=utf8
skip-character-set-client-handshake


# Change here for bind listening
# bind-address="127.0.0.1" 
# bind-address = ::1          # for ipv6

# Where do all the plugins live
plugin_dir = "/xampp/mysql/lib/plugin/" 

# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
# 
# commented in by lampp security
#skip-networking
skip-federated

# Replication Master Server (default)
# binary logging is required for replication
# log-bin deactivated by default since XAMPP 1.4.11
#log-bin=mysql-bin

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id	= 1

# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
#    the syntax is:
#
#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
#    where you replace <host>, <user>, <password> by quoted strings and
#    <port> by the master's port number (3306 by default).
#
#    Example:
#
#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
#    MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
#    start replication for the first time (even unsuccessfully, for example
#    if you mistyped the password in master-password and the slave fails to
#    connect), the slave will create a master.info file, and any later
#    change in this file to the variables' values below will be ignored and
#    overridden by the content of the master.info file, unless you shutdown
#    the slave server, delete master.info and restart the slaver server.
#    For that reason, you may want to leave the lines below untouched
#    (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id       = 2
#
# The replication master for this slave - required
#master-host     =   <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user     =   <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password =   <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port     =  <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin


# Point the following paths to different dedicated disks
#tmpdir = "/xampp/tmp"
#log-update = /path-to-dedicated-directory/hostname

# Uncomment the following if you are using BDB tables
#bdb_cache_size = 4M
#bdb_max_lock = 10000

# Comment the following if you are using InnoDB tables
#skip-innodb
innodb_data_home_dir = "/xampp/mysql/data"
innodb_data_file_path = ibdata1:10M:autoextend
innodb_log_group_home_dir = "/xampp/mysql/data"
#innodb_log_arch_dir = "/xampp/mysql/data"
## You can set .._buffer_pool_size up to 50 - 80 %
## of RAM but beware of setting memory usage too high
innodb_buffer_pool_size = 16M
innodb_additional_mem_pool_size = 2M
## Set .._log_file_size to 25 % of buffer pool size
innodb_log_file_size = 5M
innodb_log_buffer_size = 8M
innodb_flush_log_at_trx_commit = 1
innodb_lock_wait_timeout = 50

## UTF 8 Settings
#init-connect=\'SET NAMES utf8\'
#collation_server=utf8_unicode_ci
#character_set_server=utf8
#skip-character-set-client-handshake
#character_sets-dir="/xampp/mysql/share/charsets"


[mysqldump]
quick
max_allowed_packet = 16M
default-character-set=utf8


[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates

default-character-set=utf8

[isamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[myisamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout



になっており

サーブレットのweb.xmlの登録はしており、

肝心のjavaファイルは
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.sql.DriverManager;
import java.sql.ResultSet;
import com.mysql.jdbc.Connection;
import com.mysql.jdbc.Statement;
public class SelectAll extends HttpServlet {
	private ServletContext context;
	private Connection connection;
	public void init(ServletConfig config) throws ServletException {
		super.init(config);
		context=config.getServletContext();
		try {
			Class.forName("org.gjt.mm.mysql.Driver");
			connection=(Connection) DriverManager.getConnection("jdbc:mysql:///foods?useUnicode=true&characterEncoding=UTF-8","root","");
		} catch(Exception e)	{
			context.log("Error at SQL connection");
		}
	}
	public void destroy() {
		try	{
			if(connection!=null) {
				connection.close();
			}
		} catch(Exception e) {
			context.log("Error at SQL connection close");
		}
	}
    public void doGet(HttpServletRequest request, HttpServletResponse response)
	throws ServletException, IOException {
		response.setContentType("text/html;charset=UTF-8");
		PrintWriter out=response.getWriter();
		out.println("<!doctype html><html lang=ja><head><meta charset=utf-8><title>MySQL select all</title></head><body>");
		try {
			String foodname=null;
			String maker=null;
			String category=null;
			int price=0;
			String html=null;
			Statement statement=(Statement) connection.createStatement();
			String sql="SELECT * FROM foodslist";
			ResultSet rs=(ResultSet) statement.executeQuery(sql);
			out.println("<table border=\"1\"><tr><th>商品名</th><th>メーカー</th><th>カテゴリー</th><th>価格(円)</th></tr>");
			while(rs.next()) {
				foodname=rs.getString("foodname");
				maker=rs.getString("maker");
				category=rs.getString("category");
				price=rs.getInt("price");
				html="<tr><td>"+foodname+"</td>";
				html+="<td>"+maker+"</td>";
				html+="<td>"+category+"</td>";
				html+="<td>"+price+"</td></tr>";
				out.println(html);
			}
			out.println("</table>");
			rs.close();
			statement.close();
		} catch(Exception e)	{
			context.log("Error at SQL execute");
			e.printStackTrace(out);
		}
		out.println("</body></html>");
		out.close();
    }
}
なっていてコンパイルはjavac -encoding utf-8でコンパイルし配置も完璧だと思います
文字化けの直し方がずっとやっていますが分からなくて仕方ないです。
ちなみに、xamppではapach mysql tomcatと全て立ち上げlocalhost8080から配置されたフォルダにアクセスをして
いています。
でてくるのは文字化けしたものがでてきます。textの入れ方?などが悪いのか何処が悪いのかがわからないので
分かる方お願いします。